Enquire Now

Bio Finger I

Biometric reader with built-in battery

Biofinger-I is the most advanced biometric device for time attendance purposes with high quality optical sensor which can read even dirty & oily fingerprints.

This biometric reader has built-in backup battery which can supply power to standby the device for 2- 3 hours. This model is most suitable where there is a frequent power failure and construction job sites where there is limited or no power supply.

The battery will get auto recharge once the reader connected to the power supply.

Biometric Attendance System

Usually construction workers are fetched by lorry from their dormitory to their job sites. This reader can be placed in a lorry and connected to the lorry power charger. While alighting at the job site, the workers can do the clocking to the machine for attendance.

This model biometric reader comes with reliable optical sensor and strong Intel 32bit X-scale CPU. It has double-engine biometric identification arithmetic technology which supports 360 degree rotation identification.

Up to 3 fingers per employee can be registered. While doing attendance the employee can use any on the finger to do clocking.

It takes about one second to verify the employee finger and the Date & time has been registered into the device.

If a particular employee all the finger damaged, then that employee can use PIN number for attendance purpose.

In-built Features

Battery Built-in battery
Sensor Reliable Optical sensor
Data Transfer method TCPIP Network (RJ 45) / USB Thumb drive
Capacity 3000 fingerprint Templates
Storage Memory 100,00 verification records
Primary Verification method Biometric
Secondary Verification method (optional) Proximity car / PIN number
Verification Message Audio message & displays the employee name
Screen Color 3” TFT screen with GUI interface

Technical Specifications

User capacity 3000
Transaction Storage 100,000
Verification Mode 1:1, 1:N
Verification time <=2s
False Acceptance Rate (FAR) <=0.0001%
False Rejection Rate (FRR) 0.01%
Operating Temperature 0℃-45℃
Operating Humidity 20% – 80%
Weight 675g
Size 190(L) x 135 (H) x 65 (D) mm
Power Supply 12V DC 1.5A